11b and 11BH Universal Draw Bender

Operations:

Bench mounted. Cam lock tube clamp. Cam lock slide block adjustment. Direction of bend left or right.

Capacity:

Model 11B

25mm (1") x 2.5mm (125 SWG)

25mm (1") x 1.6mm (16 SWG)

Model 11BH

40mm (1 1/2") x 3mm (10 SWG)

40mm (1 1/2") x 1.6mm (16 SWG)

Maximum angle of Bend:

180 degrees

Maximum Radius:

Model 11B

125mm (5") Centre Line Radius

Model 11BH

228mm (9") Centre Line Radius

Minimum Radius:

Two diameters of tube(mandrel required)

Standard Radius Formers:

Model 11B
Former Size:	Centre Line Radius:
12mm (1/2")	45mm (1 3/4")
16mm (5/8")	55mm (2 1/4")
20mm (3/4")	65mm (2 1/2")
25mm (1")	75mm (3")

Model 11BH
Former Size:	Centre Line Radius:
12mm (1/2")	45mm (1 3/4")
16mm (5/8")	55mm (2 1/4")
20mm (3/4")	65mm (2 1/2")
25mm (1")	75mm (3")
32 mm (1 1/4"	125mm (5")
40mm (1 1/2")	150mm (6")

Overall Dimensions

Model 11B
54cm long x 51cm wide x 13cm high

Model 11BH
76cm long x 84cm wide x 14cm high

Net Weight:

Model 11B	Model 11BH
Approximately 34kg	Approximately 85kg

Additional Attachments:

Mandrel attachment bed
Ball mandrels
Tooling for thin-wall tubes
Special Slide block jaw
Mandrel extractor
Tooling for below standard bends
Anti-frictions jaw attachment
Plain mandrels
Multi-groove formers

After Sales Service:

A tool design service is available for special bending applications such as; thin wall tubing, angle iron, square and other extruded section materials.

Spare Parts:

Available from stock

All specifications are subject to change without notice.