10B Hydraulic Universal Draw Bender

Operation:

Portable. Cam lock tube clamp. Cam lock slide block adjustment. Direction of bend right hand. Air/Hydraulic or Electric Hydraulic.

Capacity:

50mm (2") x 3mm (10 SWG)For thin wall tubes a mandrel may be used

Maximum Angle of Bend:

180 degrees plus allowance for material spring back

Maximum Radius:

300mm (12") Centre Line Radius

Minimum Radius:

2D CLR (mandrel required)

Overall Dimensions:

Approximately 85cm long x 35cm wide x 115cm high (with cabinet)

Net Weight:

Approximately 130kg including standard tooling and pump

Additional Attachments:

Mandrel attacment bed	Ball mendrels
Special slide block jaw	Mandrel extractor
Anti-friction jaw attachment	Plain mandrels
Multi-groove formers	Tooling for thin wall tubes
Tooling for below standard radius bends
Optional pump (any suitable Enerpac pump)

After Sales Service:

A tool design service is available for special bending applications: such as thin wall tubing, angle iron, square and other extruded section materials.

Spare Parts:

Available from stock