Swadesir International - Floor Sanders & Floor Sanding Supplies

The Golia 43 is a single brush machine equipped with a traditional 16 inch pad for cutbacks and polishing.
The Golia is designed to solve ergonomical problems. Weighing 43kg, the Golia has a particular strong handle with a control for adjusting it to the height required and another one to operate accessories. It can be manoeuvred easily in difficult areas. A complete range of accessories are available to enable the machine to be used in many different ways, from polishing to finishing; formation and smoothing of the floor foundations; recovery and preparation of the foundation for laying new floors; cleaning, polishing.

Used correctly with abrasive discs of the right grain size, can completely remove varnish that is worn and prepare the wood without using any other machine.

The Golia can be equipped with

• A disc with cutters to eliminate the glue of carpeted and vinyl floors.
• A vacuum unit
• A backing disc to polish pre varnished parquetry

Accessories available for use with the Golia 43

• Backing disc- Rigid disc with central fixing flange and sponge rubber bearing for any kind of polishing and on any kind of surface.
• Ring wheel- Carborundum wheel, coarse grained suited to polish floor foundations. It removes points and cordons, allowing a considerable saving of glue and of products for plaster levelling.
• It is also designed to scrape compact surfaces preparing them for a perfect glue adhesion used for the new floor
• Segmental wheel- Disc that allows the mounting of six carborundum wheels suitable for polishing hard surfaces and removing excessive cement materials.
• Scarifying Brush- Steel brush used to remove soft and doughy material such as greasy deposits, workshop remains etc.
• Disc with cutters- Disk with five or seven cutters, according to the Golia used, made of hard metal. It is used to remove the adhesive used previously, varnishes, hard coverings, products for plaster levelling etc.
• Steel Disc- available in 50 and 60cm diameters. It can compact and polish the fresh floor foundation immediately after the cement conglomerate has been levelled. The steel disc can be employed both with traditional and special mortars.
• Multidisk and all its features.
• Drum speed 154 rpm
• Working width 430mm
• Weight 43Kg

To make an enquiry on this machine
CALL (03) 9460 3444
9 - 5 pm EST